Hayes Endeavor Brake Control for Toyota Vehicles

Hayes Endeavor Brake Control for Toyota Vehicles Review

Hayes Endeavor Brake Control for Toyota Vehicles Feature

• Includes wire harness for Toyota vehicles with tow package
• Digital Inertia controller
• Quik-Connect feature
• Easy to use
• For use with electric and electric over hydraulic braking systems

This controller has the ability to sense deceleration of the tow vehicle, which provides premium braking. This controller is equipped with a digital display allowing you to select percent of power, voltage, or current. The Endeavor is equipped with a microprocessor allowing it to save all your settings. The smart controller which allows for several diagnostic tools to help you in your braking needs. Illuminates trailer lights when using manual braking. Handles up to 4 axles. Display reads current, percent of power, and voltage. Power boost (turn-on): 15%, 20%, 25%. Lifetime limited warranty. Quick reference card included. Fits: 2009 - 2004 Toyota 4Runner 2009 - 2004 Toyota Sequoia 2009 - 2004 Toyota Tundra 2005 - 2004 Lexus GX470

Hayes G2 Brake Control for Ford Vehicles

Hayes G2 Brake Control for Ford Vehicles Review

Hayes G2 Brake Control for Ford Vehicles Feature

• Audible signal alert for connection continuity for safe braking.
• Large, high-resolution diagnostic liquid crystal display panel, shielded from glare.
• Quick-Connect mated OEM harness makes installation a snap.
• Easy to adjust gain control for smooth stopping. Power boost memory feature.
• For use with electric and electric over hydraulic braking systems

Introducing the new Hayes G2 Brake Boss trailer brake controller with an audible signal alert for connection continuity - a market-exclusive feature that makes for safer braking. The easy-to-find, easy-to-use manual emergency braking control lets you apply full power in emergency stopping situations. The three-axis accelerometer technology automatically levels and senses the rate of deceleration. The G2's large, high-resolution diagnostic liquid crystal panel is recessed to eliminate glare. This easy-to-read digital display indicates the amount of power being sent to the trailer brakes and allows adjustment in three modes (percent of power, voltage, and current). This advanced controller has a "power boost feature" which gives you the ability to apply more initial braking power when towing heavier trailers. The G2 - with its sleek, low-profile design - is compatible with the new Hayes Universal Quik-Receiver mounting sleeve to make installation a snap. Fits: 2008- 1994 Ford Full Size Pickups/ F150 2008 -1994 Ford Full Size Vans/ E150 2008 -1997 Ford Expedition 2008 -1995 Ford Windstar 1996 -1994 Ford Bronco 2008 -2000 Ford Excursion

Valley 32810 Brake Control

Valley 32810 Brake Control Review

Valley 32810 Brake Control Feature

• ODYSSEY II BRAKE CONTROL

ODYSSEY II BRAKE CONTROL

Tekonsha 3025-P Brake Control Wiring Adapter for 99-02 GM

Tekonsha 3025-P Brake Control Wiring Adapter for 99-02 GM Review

Tekonsha 3025-P Brake Control Wiring Adapter for 99-02 GM Feature

• Fits: GM 1999 - 2002

OEM style wire harness for models equipped with trailer tow package. For use with other brake controls. 99-02

Curt Manufacturing 51322 Oem Brake Control Harness

Curt Manufacturing 51322 Oem Brake Control Harness Review

Curt Manufacturing 51322 Oem Brake Control Harness Feature

• 229584
• 225117

Brake Control Harness w/ Quick Plug I-2132These harnesses make installing a controller a snapIncludes O.E.M. connector, 2' of wire, protective sleeve to prevent wire damage and 12 gauge wireWire color match to standard brake control harnesses

Hopkins 47745 Universal Brake Control Connector for Dodge 1997-2008

Hopkins 47745 Universal Brake Control Connector for Dodge 1997-2008 Review

Hopkins 47745 Universal Brake Control Connector for Dodge 1997-2008 Feature

• No more hassles - it's Plug-In Simple
• Dodge
• Includes tow prep

Make your brake control installation easy, no more running wires through the fire wall or searching for the stop switch

Hayes 81789 Quik Connect Dual Mated Universal/4 Wire Leads Wiring Harness

Hayes 81789 Quik Connect Dual Mated Universal/4 Wire Leads Wiring Harness Review

Hayes 81789 Quik Connect Dual Mated Universal/4 Wire Leads Wiring Harness Feature

• Easy, cost saving installation
• No tools required
• Simply plug in two connectors
• Insures wiring continuity
• Do it yourself installation in minutes

Hayes Universal Harness with 24" four wire leads (Hard Wire Installation). Easy, cost saving installation and no tools required. Simply plug in two connectors and it insures wiring continuity.

Tekonsha Voyager Brake Controller

Tekonsha Voyager Brake Controller Review

Over three billion miles of RV brake control experience brings you the Voyager, a new industry standard. NOW HANDLES UP TO 8 BRAKES!! Voyager?? Features The unit is more attractive, easier to install, and makes better use of space. Recessed controls protect gain and level settings from accidental readjustment. Ergonomically designed control lever for easy, accurate gain and level settings. Traditional 4-wire hookup and under-dash U-bracket assure secure and permanent installation. System is compatible with virtually any 12-volt, negative ground tow vehicle, foreign or domestic. Broad control range makes setting quick and easy. The green LED display tells you that the unit is on and there is a complete circuit with the trailer brakes. As braking power is applied, the LED changes color gradually from green to red, to indicate relative braking power. The advanced electronics in the Voyager minimizes false braking, to give you a smoother ride, even on the roughest roads. Voyager has a f

Hopkins 47285 Brake Control

Hopkins 47285 Brake Control Review

Hopkins 47285 Brake Control Feature

• Designed to provide excellent control for trailer braking system
• Offers short-proof protection
• Operates at any angle
• Removable for storage
• Backed by a limited lifetime warranty

Hopkins Digital Electronic Brake Control is designed to provide excellent control for trailer braking system. It offers short-proof protection from electric brake wire shorts. This control operates at any angle and can be easily removed for storage. It is time-based and is backed by a limited lifetime warranty.

Tekonsha Prodigy P2 Brake Control for Nissan Vehicles

Tekonsha Prodigy P2 Brake Control for Nissan Vehicles Review

Tekonsha Prodigy P2 Brake Control for Nissan Vehicles Feature

• Multiple Mounting Options - Including 360 degree vertical rotation.
• Designed to work with Electric over Hydraulic Brake Systems.
• Lifetime warranty.
• Made for up to four-axle trailer brake systems.
• Includes universal wire harnes to connect to tow package.

No level adjustment necessary - it adjusts itself to varying terrain as you drive. Works proportionally in reverse. Digital display depicts voltage delivery to trailer during braking. Continual diagnostics check for proper connection and shorted magnet. "Boost" feature gives the ability to apply more initial trailer braking power. Unique pocket mount. Reverse battery protection for both vehicle and breakaway systems. Designed to work with electric over hydraulic trailer brakes. Produces stops that are in proportion to vehicle's deceleration rate. Fits: 2004-2008 Nissan Titan 2004-2008 Nissan Pathfinder Armada 2005-2010 Nissan Pathfinder 2005-2010 Nissan Frontier 2004-2010 Infiniti QX56

Smart Flash LED Control Module Signal Flasher Brake Light Modulator

Smart Flash LED Control Module Signal Flasher Brake Light Modulator Review

Smart Flash LED Control Module Signal Flasher Brake Light Modulator Feature

• Turn Signal Control Module for American Made V-Twin Motor Cycles and Golf Carts
• This module combines the rear signals with the brake light so you can just run two red lights on the rear and have stop, turn and tail lights.
• In other words it converts the 5 wire system found on most Japanese bikes to the 4 wire system common to some American made bikes.
• Works with LEDs or Incandescent Lights.
• Plug in replacement for most all American Made Motorcycles like Ultra, American Iron horse and others

Turn Signal Control Module for American Made V-Twin Motor Cycles and Golf Carts. May also be wired into any 12 volt vehicle with the included pigtail. This module combines the rear signals with the brake light so you can just run two red lights on the rear and have stop, turn and tail lights. In other words it converts the 5 wire system found on most Japanese bikes to the 4 wire system common to some American made bikes. Works with LEDs or Incandescent Lights. Plug in replacement for most all American Made Motorcycles like Ultra, American Iron horse and others Can be wired into any 12 volt vehicle with the included pigtail. Includes rear brake light modulator (flashes the rear brake lights upon application of brakes. Made in USA - highest quality! Steady flash rate, independent of the load or type of lights used (LEDs, Incandensents or a mix of both)! Auto-cancel feature turns off the blinkers if left on. Emergency flasher mode. Designed for Push Button inputs. Brand new - never installed. Complete Fuse protection. Typically ships next business day! This module requires some basic electronic knowledge to install. If you are in question about the difficulty of installation, email us and we will send you the installation guide for this module. If you are in doubt about your ability to install, have it installed professionally! Contact a local automotive electronic or stereo installation shop for assistance.

Valley 52810 Odyssey Trailer Brake Control

Valley 52810 Odyssey Trailer Brake Control Review

Valley 52810 Odyssey Trailer Brake Control Feature

• No manual adjustment required
• Easy-to-read digital display
• Manual override lever provides stop lamp activation
• Supports 2, 4, 6 or 8 brake systems
• Four easily adjustable power level settings

Valley Odyssey Trailer Brake Control continually adjusts for varying road conditions, changes in terrain and braking situations. When the tow vehicle's brakes are applied the brake control senses the vehicle's rate of deceleration and applies the correct amount of brake power for a smooth less seamless stop. The brake control can be mounted in variety of positions, making it easily accessible and comfortable from the driver's position of almost any tow vehicle. The unit is designed to be mounted horizontally or vertically, at any angle above or below the dash. The unit includes mounting brackets, hardware and easy-to-follow installation instructions. The brake controls do not interfere with vehicle's anti-lock brake, cruise control or other electrical systems.

Hayes 81795 Quik Connect Dual Mated Dodge Ram 1500 2011-2010 Wiring Harness

Hayes 81795 Quik Connect Dual Mated Dodge Ram 1500 2011-2010 Wiring Harness Review

Hayes 81795 Quik Connect Dual Mated Dodge Ram 1500 2011-2010 Wiring Harness Feature

• Easy, cost saving installation
• No tools required
• Simply plug in two connectors
• Insures wiring continuity
• Do it yourself installation in minutes

Hayes Quik Connect Dual Mated OEM-HBC Wiring Harness insures wiring continuity. Easy, cost saving installation and no tools required. Simply plug in two connectors.

Valley Tow 30406 Brake Control Wiring Harness

Valley Tow 30406 Brake Control Wiring Harness Review

Valley Tow 30406 Brake Control Wiring Harness Feature

• SP BRAKE CONTROL PLUG

SP BRAKE CONTROL PLUG

Hayes G2 Brake Boss Brake Control for GM Vehicles ('99-'02)

Hayes G2 Brake Boss Brake Control for GM Vehicles ('99-'02) Review

Hayes G2 Brake Boss Brake Control for GM Vehicles ('99-'02) Feature

• Audible signal alert for connection continuity for safe braking.
• Large, high-resolution diagnostic liquid crystal display panel, shielded from glare.
• Quick-Connect mated OEM harness makes installation a snap.
• Easy to adjust gain control for smooth stopping. Power boost memory feature.
• For use with electric and electric over hydraulic braking systems

Introducing the new Hayes G2 Brake Boss trailer brake controller with an audible signal alert for connection continuity - a market-exclusive feature that makes for safer braking. The easy-to-find, easy-to-use manual emergency braking control lets you apply full power in emergency stopping situations. The three-axis accelerometer technology automatically levels and senses the rate of deceleration. The G2's large, high-resolution diagnostic liquid crystal panel is recessed to eliminate glare. This easy-to-read digital display indicates the amount of power being sent to the trailer brakes and allows adjustment in three modes (percent of power, voltage, and current). This advanced controller has a "power boost feature" which gives you the ability to apply more initial braking power when towing heavier trailers. The G2 - with its sleek, low-profile design - is compatible with the new Hayes Universal Quik-Receiver mounting sleeve to make installation a snap. Fits: 2002 Cadillac Escalade & Escalade EXT 2002 - 1999 Chevrolet Silverado & GMC Sierra Full Size Pickups 2002 - Chevy Avalanche 2002 - 2000 Chevy Suburban & Tahoe 2002 - 2000 GMC Yukon & Yukon XL 2002 - 2001 GMC Yukon Denali & XL(New Body Style)

Tekonsha 3050-P Brake Control Wiring Adapter for 04-C Nissan

Tekonsha 3050-P Brake Control Wiring Adapter for 04-C Nissan Review

Tekonsha 3050-P Brake Control Wiring Adapter for 04-C Nissan Feature

• Fits: Nissan

O.E. M. Style Wire Harness for models equipped with trailer tow package. Harness includes O.E.M. connector, 3 ft. leads and connector for hookup to Tekonsha® Prodigy Brake Control (for use with other brake controls Prodigy connector can be removed).

Hopkins 47755 1997-2008 Dodge LiteMate Electronic Brake Control Vehicle Adapter (Pico 6517PT)

Hopkins 47755 1997-2008 Dodge LiteMate Electronic Brake Control Vehicle Adapter (Pico 6517PT) Review

Hopkins 47755 1997-2008 Dodge LiteMate Electronic Brake Control Vehicle Adapter (Pico 6517PT) Feature

• Makes Electronic Brake Control Install Easy
• Ram Pickup with Tow Package 1997-2008
• Dakota with Tow Package 1997, 2004-2006
• Durango with Tow Package 1998-2008
• For vehicles equipped with a factory tow package

Make Electronic Brake Control Installation Easy With Adapters!! Locate Vehicle Connector (Under Dash). Plug in Correct Adapter. Plug Adapter into Brake Control.